Agricultural Research Management Information System

Home
Research Summary
Search
About Us
- ARMIS
- Brochure
Contact Us
Report
User Request
Data Input
Help
- Operation Manual
  - PDF
  - Video
- Program Area & Commodity
We have reached 37600 number of research entries at this moment.

- Logout

Research Detail

Home
Research
Detail

Test and Evaluation of Mechanical Rice Transplanter During Aman Season

Md. Anwar Hossen
Senior Scientific Officer
Farm Machinery and Post harvest Technology Division, Bangladesh Rice Research Institute, Gazipur-1701.

Dr. Md. Durrul Huda
Principal Scientific Officer
Farm Machinery and Postharvest Technology Division, Bangladesh Rice Research Institute, Gazipur-1701.

Dr. Md. Syedul Islam
Director General
Bangladesh Rice Research Institute, Gazipur-1701.

Abstract/ Executive Summary:

Walking type mechanical rice transplanter was tested in different farmer’s field during Aman/2011 season to evaluate the field performance. During field test, flexible plastic tray (58 x 28 x 2.5 cm) was used to raise seedling for the transplanter. 22-26 days older seedling with 3-4 leaves was used in this experiment. Yield performance of rice transplanting by mechanical rice transplanter were compared with hand transplanting method. In hand transplanting plot, farmer’s seedling of the same variety BRRI dhan32 and BRRI dhan49 was used. Average yield of the machine transplanting plot and hand transplanting plot were 4.95 ton/ha and 4.85 ton/ha. During evaluation, average speed (m/sec), field capacity (deci/hr), fuel required (l/hr), transplanting width (cm), no. of plants per hill, no. of hill per m², missing hill per m², floating hill per m², buried hill per m² and damaged hill per m² were found 0.8, 68.3, 0.88, 120, 3-6, 20, 1.8, 0.8, 0.5 and 1.1 respectively.

Keywords: Mechanical transplanter, Seedling, Field capacity, Fuel consumption, Missing hill, Floating hill

Location: The locations were Kumarkhali, Kushtia ; Sadar, Kushtia; Rajendrapur, Sadar, Netrakona; Challisha, Sadar, Netrakona; Laksam, Comilla; Purbadhala, Netrakona; Burichang, Comilla; Sadar, Rangpur; Paba, Rajshahi and Mithapukur, Rangpur

Start Date: 00-00-2011

End Date: 00-00-2011

Program Area: Socio-economic and Policy

Commodity: Transplanter

Objectives:

To evaluate the field performance of mechanical rice transplanter in different locations of the country

Methodology:

During test, flexible plastic tray (58 x 28 x 2.5 cm) was used to raise seedling for the transplanter. 18-25 days older seedling with 3-4 leaves was used in this experiment. Land was prepared and leveled by power tiller. After land preparation, the field was kept two days for soil settlement. 0.5 cm standing water was maintained during field operation. Seeds were soaked into fresh water for 24 hrs and stir them. After 24 hours, the shocked paddy was kept in warm condition one day for sprouting and then sows in the tray for seedling. Mechanical rice transplanter, seedling raised on tray and polythine sheet, scale, rope, tape, stopwatch, calculator, weight balance etc were used during the study. • Varieties : BRRI dhan49 and BRRI dhan32 • Seedling age: 20 to 26 for machine transplanting and 30 days for hand transplanting • Spacing: 30 x15 cm for machine and 20 x 15 cm for hand. During performance study in different locations, the following treatments were applied: • T₁ = Mechanical transplanting • T₂ = Manual transplanting

Source of Information: BRRI Annual Research Review, 2011-12

Article Link (Online Journal):

Funding Source:

1. World Bank	Budget:
2. Bangladesh Agricultural Research Council	Budget:

Total Budget (Tk.) :

Achievement/Findings:

Average yield of the machine transplanting plot and hand transplanting plot were 4.95 ton/ha and 4.85 ton/ha. During evaluation, parameters of rice transplanter on average speed (m/sec), field capacity (deci/hr), fuel required (l/hr), transplanting width (cm), no. of plants per hill, no. of hill per m², missing hill per m², floating hill per m², buried hill per m² and damaged hill per m² were 0.8, 68.3, 0.88, 120, 3-6, 20, 1.8, 0.8, 0.5 and 1.1 respectively.

Knowledge Management: Report/Proceedings